December 2023 Gap Shot Publication

[ad_1]

Take a look at this newest challenge of the Professional-Line Gap Shot Publication – December 2023!

This month has one thing for everybody from a brand new Paddle tire for PROMOTO to Dust Oval tires to Massive Scale Tires and an progressive Crawler Bumper Set!!

Scorching Lap 2.2″ Dust Oval Buggy Entrance & Rear Tires

Introducing the subsequent era of dash automotive dust oval tires from Professional-Line, the Scorching Lap! This tire was designed from the bottom up for all-out efficiency, consistency, and long-lasting tire put on.

The Scorching Lap encompasses a deep, geometric grooved tread that gives elevated ahead chew, a predictable, clean steering really feel, and nice tread cleanout. It’s obtainable in both MC (Clay) or M4 (Tremendous Gentle) compounds to fit your observe’s particular wants, and like each different tire that Professional-Line makes is proudly Made within the USA!

Pair with the Showtime Dash Automobile Wheels, Entrance Wheels (PRO278203) & Rear (PRO278303), for the last word improve in type and efficiency in your dash automotive!

Scorching Lap 2.2″ Dust Oval Buggy 2WD Entrance Tires
PRO830903 M4 (Tremendous Gentle)
PRO830917 MC (Clay)

Scorching Lap 2.2″ Dust Oval Buggy 2WD Rear Tires
PRO830803 M4 (Tremendous Gentle)
PRO830817 MC (Clay)

Time to hit the dunes or shred some powder! The Roost MX rear paddle tire from Professional-Line is designed to show your Losi® PROMOTO-MX right into a sand or snow-flinging machine.

The Roost MX does precisely what its identify states it makes large roosts in sand or snow! It options 9 massive cup-shaped scoop paddles permitting you to energy out of deep sand and stand up on the airplane with ease. The stiff, sturdy compound retains the paddles true and put on to a minimal.

A couple of ideas for driving your Roost MX-equipped PROMOTO-MX within the dunes:

For the last word dealing with on sand, take away the facet lean bars/wheels to maintain the bike from digging in when leaning/steering.
Maintain your velocity up as a lot as attainable to maintain the bike floating throughout the sand!
Brush/shake out your chain after each battery pack to take away as a lot sand as attainable
A knobby entrance tire is one of the best performing entrance tire in addition to being essentially the most scale

The Roost MX comes conveniently pre-glued to a black Supermoto wheel, which is smaller in diameter than the inventory wheels. This enables for the most important attainable paddle and provides your bike that true-to-scale look. Contained in the tires are high-quality closed cell inserts for constant dealing with and sturdiness. This tire is proudly manufactured and assembled at Professional-Line Headquarters within the USA!

Roost MX Sand/Snow Paddle Motorbike Tire Mounted on Black Supermoto Wheel
for PROMOTO-MX Rear
PRO1023810

——————–

Professional-Line is proud to announce our first licensed 2.9″ tire from Mickey Thompson Tires, the Baja Professional™ X! The Baja Professional™ X is a competition-proven excessive terrain tire good in your Axial® SCX6™.

Coming in at a large 7.85″ tall x 3″ vast, that is essentially the most excessive SCX6™ tire from Professional-Line but! Molded in our legendary G8 compound, all the small print of this gnarly tire are captured in good 1/6 scale element: from the Tread Biter™ cleats for added traction to the Mud Scoops for added cleansing energy, to the Large Sidebiters® and angled shoulder scallops for final facet grip. Symmetric directional tread sample gives glorious traction and cleansing energy as properly.

Vital notice: To seize this tire in one of the best scale proportions attainable, the Baja Professional X is wider than a standard SCX6™ tire. This requires at the very least +2mm of offset (wheel or hex) to keep away from rubbing in your SCX6™ hyperlinks or springs. Professional-Line’s Methodology 305 NV Wheel Faces (PRO281400) are an amazing choice!

Mickey Thompson Baja Professional X 2.9″ G8 Rock Terrain Truck Tires
for Axial® SCX6™ Entrance or Rear
PRO1023214

——————–

Professional-Line is proud to introduce a brand new improve bumper designed to extract the utmost attainable efficiency out of your Axial® SCX10™ III! This new bumper set is for rock crawlers who worth simplicity and performance.

This bumper set was designed from the bottom as much as obtain one of the best floor clearance, tire clearance, and strategy angle attainable whereas sustaining a Scale Look. The bumper is moved up and again into the chassis, making it an ideal match with our high-performance our bodies such because the Cliffhanger (PRO356600, PRO361500 Cab-Solely) and Coyote (PRO361700). The entrance bumper mount options tabs for our 2″ Extremely-Slim lightbar (PRO635200) with cable hooks to maintain the wires out of the best way, or you’ll be able to mount two D-Rings for scale restoration (not included). A built-in winch cable slot acts as a fairlead in your restoration winch (not included).

The brand new rear bumper provides versatility to your rig, with 3 completely different seems to fit your construct:

Use the included plugs within the rear for a minimalist bumper that has a clean, completed look with a most departure angle
Flip the plugs round to make the most of the D-Rings hook mounts (hooks not included)
Use the by way of holes to show it right into a bumper mount for the inventory Axial® bumper, permitting you to convey the bumper nearer to the body rails. This adjustability permits the inventory bumper to suit a wider vary of our bodies and will increase the departure angle.

The bumper set is a direct match in your SCX10™ III and is Made within the USA from modern matte black nylon. Don’t get hung up on the rocks, get your new Excessive-Efficiency bumper set right now!

Excessive-Efficiency Crawler Bumper Set (Entrance & Rear)
for SCX10™ III
PRO640400

——————–

Similar to the bigger Coyote for 12.3″ Crawlers, this mini-Coyote encompasses a pinched entrance finish and a dove-tailed rear finish for max tire clearance whereas nonetheless sustaining a true-to-scale, Late-80s domestic-style look. The wheel openings have clearance for our largest SCX24™ tires with no trimming wanted, whereas the brief overhangs present a best-in-class strategy and departure angle.

The Coyote is constructed from a single piece of crystal-clear polycarbonate to avoid wasting on weight and has a molded-in drop-down mattress to make room so that you can add your favourite scale equipment. Every part on the Coyote physique has been optimized for max crawling efficiency in your SCX24™. Don’t get caught on the rocks, get your very personal Coyote physique right now!

Coyote Excessive Efficiency Clear Physique
for SCX24™
PRO363200

——————–

NOW WITH REMOVABLE HEX WHEELS!

The Dumont Paddle tire makes use of the newest in paddle tread know-how with massive offset V-shaped paddles for max roosting energy. Professional-Line P-L logos have been embedded into the tire carcass giving it the type that you’ve come to count on from Professional-Line. The Dumont Paddle tire will get its identify from the unbelievable Dumont Sand Dunes in California, however these paddle tires are equally at residence shredding your native snowfield within the winter.

The Dumont Paddle tires are mounted to the Raid 2.4″/3.25″ Wheel, that includes a detachable hex for final versatility. Not solely do the included 17mm hexes provide the choice between the MOJAVE™ 6S and Limitless Desert Racer® axles and offsets, however in addition they let you simply exchange a broken wheel hex without having to interchange your glued tires. The hefty 6×30 interlocking hex design is secured to the wheel by 6 M3 screws which can be spaced 30mm throughout. Substitute Hexes can be found individually (PRO639000), whereas our full line of 6×30 hexes may even match no matter customized construct or fitment you’ll be able to dream up.

Dumont Sand/Snow Tires Mounted on Raid Black 6×30 Detachable 17mm Hex Wheels
for Mojave™ 6S and UDR® Entrance or Rear
PRO1018911

Limitless Desert Racer® is a registered trademark of Traxxas® L.P.

The Menace HP tires are BELTED to deal with excessive energy and excessive speeds with ease. No tire ballooning right here! Remodel the dealing with of your truck with the low-profile carcass, deep grooves, and long-lasting compound, additionally nice for velocity runs! These tires and Raid 5.7″ wheels have been developed from the bottom as much as be light-weight and sturdy sufficient to deal with excessive X-MAXX® and KRATON™ 8S punishment to provide the greatest all-around bashing expertise attainable.

The Raid 5.7″ Black Wheel now encompasses a detachable hex for final versatility! Not solely do the included hexes let you select between the KRATON™ 8S and X-MAXX® axle sizes, however in addition they let you simply exchange a broken wheel hex without having to interchange your glued tires and remove the necessity for different adapters or wheel modification. The hefty 8×48 interlocking hex design is secured to the wheel by 8 M3 screws which can be spaced 48mm throughout. Substitute Hexes can be found individually (PRO638300).